BUILD IT YOURSELF AND SAVE !
SILESIA GROUP INC., |
|
|
|
|
|
| SILESIA GROUP INC. has the BEST PRODUCTS for
today's market with steel framed homes that are... Stronger. Build a stronger frame with fewer
Safer. Unbeatable pro-
Faster. Don't be fooled by SGI Steel imitators.
|
Energy Effident. BIG energy savings with
9-inch R-30 insulation. Tn-Steel's pre-engineered systems provide wider wall cavities than conven- tional wood framing or stick-for-stick steel framing, allowing 9-inch thick insulation to slip into walls and ceilings, rather than the 3 1/2-inch (R-l 1) insulation typically used in ordinary residential construction. Added insulation reduces noise from traffic and outside distractions. Healthier. May improve indoor air quality compared to homes framed with arsenic-treated lumber, or resin-adhe- sives and the formaldehyde-based glues of some engi- neered-wood products. WithTn-Steel, there is no need to use cancer-causing chlordane or other chemical termicide soil treatments. Consistent. Predictable quality and stable
Flexible. Steel framing is self-supporting,
no
Kinder to the
|
Basic Home Package Items
1 Heavy gauge steel columns, beams and rafters.
2 Metal roof purlins
3 Steel stud system for exterior walls
4 Metal framing components for dormers, roof and saddles
5 Metal sub-fascia for roof overhangs
6 Metal interior studs and track
7 Metal furring for all ceiling surfaces
8 Metal second floor joists for all two-story areas (Not Shown)
9 All bolts and fasteners for columns, rafters, joists, purlins, studs,
furring, sub-fascia framing and exterior wall and roof sheathing screws
10 Complete set of working drawings including anchor bolt layout and
erection instructions
Options (Available from Classic)
Steel 1st floor system
Metal Roofs
Standard bay extensions and porch additions
Longer columns for higher ceilings
Decks, porches and detached garages
Decking screws for floors
Scissor frame for vaulted ceilings
Special Notes
* Standard Package may be updated from time to time
* Sealed plans are available at extra cost when requested
* Ultra high wind loads and snow loads are available for areas with
extreme conditions.
ALL
BROCHURES CATALOGS ARE ON THE WEB
ALL OUR DISTRIBUTORS GET FULL SUPPORT, SEALED PLANS ( OVER 100 MODELS) 30%-60% IN DISCOUNTS, TECHNICAL SUPPORT AND ADVERTISING MATERIALS.
IF YOU ARE NOT DISTRIBUTOR AND YOU WOULD LIKE TO BUILD OUR MODELS WE NEED TO HAVE FULL PAYMENT - AT THIS TIME WE HAVE FINANCING AVAILABLE THRU INDEPENDENT LENDER - DEPOSIT OF $500.00 REQUIRED.
COST OF DISTRIBUTORSHIP IN USA - US $1000.00
COST OF DISTRIBUTORSHIP IN OTHER COUNTRIES $1500.00
BUILD BY YOURSELF - $600.00 ASSOCIATION FEE REQUIRED ( SEALED PLANS + ALL INFORMATION)
SAVE MONEY - BUILD YOURSELF !
FREQUENTLY ASKED QUESTIONS
Who will constuct the house? Do we find our own builders to construct the house and if so, are there instruction on how to construct it? Alternatively, can we pay for a qualified builder to come out from the US or the nearest point to Sri Lanka i.e. the Middle East and construct the house for us? You can do it by yourself or you can hire contractor.
2. Do you need to see plans of the land we have in Sri Lanka? No, HOWEVER MAKE SHURE THE MEASUREMENTS ARE OK WITH LOCAL ZONING OR REQUIREMENTS.
3. How long approximately, does it take to construct one of these houses? The frame can be done by 2 people in about one week - depends on the model. To finish the house depends on how many people and how do you finish the house.
4. How do we pay - can we transfer the money to your bank account? You can pay with credit cards, money orders, check, cashiers check ect. - We even got payments from Pay Pal
5. Do we get a guarantee with the house and if so for how long? This is steel frame - there is lifetime guarantee. It is 3 times stronger then wood and 3 times lighter !!!
Why build with steel?
Residential steel framing members are cost effective, light weight,
easy to handle, and manufactured under strict quality control guidelines.
Steel framing is also termite proof and non combustible.
Will my home look different than the rest in my development?
No. In fact, because of steel's strength you can design your
home with larger open spaces. With a steel frame, the walls will
remain straight and true and can be finished with the same materials traditionally
used.
What about the environmental impact of steel construction?
The overall recycling rate of the steel industry is 66%, the highest
of any industry in the country, offering an environmentally sound home
framing alternative. Steel framing scrap is a valuable commodity
that should not end up in a landfill.
What about cost?
The price of steel has been relatively constant over the last decade.
While the price of traditional framing materials has been erratic and growing
at a rate much faster than inflation, steel prices have only experienced
small quarterly adjustments. Builders interviewed nationwide
have affirmed that framing with steel is commonly less expensive than traditional
framing.
Will steel framing affect the indoor air quality?
No. Steel framing is recommended by The Healthy House Institute for
chemically sensitive and environmentally conscious homeowners who seek
good indoor air quality. Steel frames do not need to be treated for termites
and are free of resin adhesives and chemicals normally present in other
construction materials.
How do I hang pictures in a steel framed home?
As in a traditional home, depending on the weight of the picture, you
can hang it from the drywall with toggle bolts or hangers. Heavier objects
can be hung from screws attached directly into the studs, which can easily
be found with a magnet.
Will I be able to remodel my home?
Yes, since steel framing allows for larger spans, a home can be designed
without interior load-bearing partitions, making it easier for homeowners
to complete alterations without affecting the structure.
Will my home rust?
The use of Red Oxide painted and galvanized steel frame components
protects your home against rust.
Will the steel interfere with portable radios, phones, or TV reception?
No. Waves pass through the spaces between studs allowing the
use of all of the radios, phones, and television sets in your home.
What about lightning?
The steel frame offers the home occupants better protection than any
other construction system. Scientists recommend seeking shelter in
steel frame structures during lightning storms because the steel frame
provides a path to the ground reducing the likelihood of explosions, secondary
fires, or personal injury.
Can my house be built to resist earthquakes and hurricanes?
Yes. Positive connections and the strength of steel provide great
protection against earthquakes and hurricanes. Steel's high strength
and ductility make it the best construction material for earthquake resistant
design.
Can my home be energy efficient?
Yes. Steel framing can be designed to meet or exceed governmental
energy efficiency standards. In addition, by staying straight and
true, the steel framing helps prevent cracks due to shrinking or warping,
thus preventing air leaks that result in costly loss of energy.
Will I have to pay higher insurance premiums for my homeowner's
insurance?
No. As a matter of fact, because of steel's excellent performance record
in earthquakes, and because it is not affected by termites and is non-combustible,
home owners may be able to save on insurance premiums.
Will I be able to sell my home?
Your home does not need to look any different than your neighbors and
should sell just as easily. Because of steel's high strength and durability
your home should last and retain its value for a long time. In fact, if
you take advantage of steel's strength and flexibility by designing wide
open spaces, you will have additional selling features.
How can I get more information on steel framing?
The American Iron and Steel Institute has publications and videos that
will provide you with more information.
All you need to do is call the SILESIA GROUP INC at CONTACT

METAL GARAGES


|
15 AVAILABLE COLORS or GALVALUME PLUS* PANELING COMES WITH COMPLETE INSTRUCTIONS OPTIONS (Call for pricing)
Click here to view images of metal garages Classic Steel Frame Homes Garage Package
"Due to the volatile steel pricing,
To contact us for further information.
To contact us for further information.
To add one 12' Bay Extension add the following:
12' x 8' "Due to the volatile steel pricing, please call for a quote."
|
16' x 8' 20' x 8' 24' x 8' 28' x 8' 10' HIGH
To contact us for further information.
To add one 12' Bay Extension add the following:
12'x 10' "Due to the volatile steel pricing, please call for a quote." To contact us for further information.
Prices include: Steel frames, girts @ 4', erection bolts, fastening screws, eave, rake, corner trim, ridge cap, sill angle. Building is sheeted solid with no openings. Allow 15 working days from date of receipt for shipment. Garage 50# load - Call for pricing * Galvalume Plus is a bare Galvalume substrate coated with a thin, clear acrylic film. This acrylic film protects the panels from fingerprints and boot prints. Classic Quality At Classic, our garage packages are designed, then refined for built-in cost efficiencies. These savings are translated into faster erection coupled with material and labor savings without sacrificing quality. |
STUDIO GARAGES
"Due to the volatile steel pricing,
please CONTACT
for a quote."
To contact us for further information.
TITLE
MODEL,
BDRMS
FLOORS
Studio/Garage I S
G2424S1G2 SQ FT:1015
NA 2

Studio/Garage II
SG2424S2G2 SQ FT:
1176 SECOND FLOOR NA 2


Studio/Garage IV SG2432S2G2B SG FT: 1560 NA 2

Studio/Garage V SG3224S2G3 SQ FT: 1728 2 2

Studio/Garage VI SG3224S1G3 SQ FT:1276 NA 2


TO GET FREE AD YOU NEED TO REGISTER AND PLACE LINK TO US http://mna.cc/adds/index.php?page=reg |