Cordwood-Fired Tank Water Heater
| Specifications | ||
| Volume Capacity: | 4 Gallons |
| Hot Water Production: | 2-4 Gallon/minute+@ 50o F Temp. Rise |
| Firing Time: | 15 minutes |
| Fuel Consumption: | 3 Cubic Foot/Hour +- |
| Stoking Time: | Every 1-3 hours |
| Firebox: | TurboCone, 12" X 20" |
| Tank: | Unit construction, #16 steel |
| Corrosive Protection: | Hot dip galvanized |
| Height: | 23" Tank, 27" chimney |
| Dimensions: | 17" width/dia. X 40" depth |
| T & P Waterway: | 3/4" T & P valve-top back |
| Thermosiphon Waterways: | Upper Hot & Lower Cold 1 ½" |
| Door Opening: | 4 ½" height X 6 ½" width |
| Fuel Size: | Up to 4" x 6" x 18" |
| Door Assembly: | 1/4" Plate Steel |
| Door: | Cast Iron 1/2", hinged Insulated Spring Handle. |
| Grate: | Steel 3/8" X 9" X 20" |
| Chimney: | 4" solid fuel, standard flange |
| Chimney Damper: | Cast Iron, built in, ¼" shaft |
| Ashpan: | #16 steel, powder coated |
| Temperature/Pressure Relief Valve: | Watts Regulator 100XL/ 3/4", 210 F/125 PSI -Installed |
| Operating Pressure: | 0-75 PSI |
| Test Pressure: | 150 PSI |
| Weight: | 145 lbs. net, 1775 lbs. shipped. |
| Shipping Dimensions: | 24" dia. X 46" Ht. tank; 9" x 14" x 24" components |
| Tank Insulation: | 1" polyurethane foam |
| Firebox Insulation: | 1" ceramic fiber blanket |
| Finish: | Powder Coated Deep Sea Green |
| M.S.R.P | $1000 plus $110 UPS |
| Home | Ordering |
| Contact HOTPRO | |
