Woodfired Water Heater
| Specifications | ||
| Volume Capacity: | 10 Gallons |
| Hot Water Production: | 1-2 Gallon/minute+@ 100o F Temp. Rise |
| Firing Time: | 12 minutes |
| Fuel Consumption: | 1 Cubic Foot/Hour +- |
| Stoking Time: | 3-4 Stokes/hour |
| Firebox: | TurboCone, 12" X 20" |
| Tank: | Unit construction, #16 steel |
| Corrosive Protection: | HotDip™ galvanized |
| Height: | 47" |
| Diameter: | 15" Overall, 12 1/2" Tank |
| Standard Waterways: | 3/4" Hot, Cold, Drain, T & P, Gauge |
| Thermosiphon Waterways: | ¾" NPT Both sides, 32" apart |
| Door Opening: | 3 ½" height X 5 ½" width |
| Fuel Size: | Up to 2" X 4" X 10" |
| Door Assembly: | 1/4" Plate Steel |
| Door: | Cast Iron 1/2" Thickness, Hinged, Insulated Spring Handle. |
| Grate: | Steel 3/8" X 11" |
| Chimney: | 4" solid fuel, standard flange |
| Chimney Damper: | Cast Iron, built in, ¼" shaft |
| Ashpan: | #16 steel, powdered coated |
| Temperature Gauge: | Dial Indicator, 2" |
| Sacrificial Anode Rod: | Installed |
| Drain | ¾" Brass |
| Temperature/Pressure | Watts Regulator 100XL/ 3/4" |
| Insulation | Body: 1" injected polyurethane foam
Firebox: 1" ceramic furnace insulation |
| Relief Valve: | 210 F/125 PSI (installed) |
| Operating PSI | 40 PSI, Test 150 PSI |
| Weight: | 105 lbs. net, 130 lbs. shipped. |
| Shipping Dimensions: | 18" dia. X 56" Ht. (UPS Ground) |
| Powder Coated Finish | Navajo Tan Jacket, Deep Sea Green Firebox & Ashpan |
| M.S.R.P | $630 + $90 UPS |